DGSI. Durham Geo Slope Indicator

How to install the USB Drivers updated 8-2010

Install the most recent version of DMM. You must do this before connecting the DataMate II to the PC. The screen shots below were obtained with Windows XP. Screens for Vista and Windows 7 may be slightly different.

Part 1: Installing the Digitilt DataMate USB Driver

1. Turn on your computer.
2. Connect the DataMate to your computer.
3. Switch the DataMate on.
4. The hardware wizard appears. If the hardware wizard does not appear, see instructions at the bottom of the page.

1. Windows asks you to select the device driver.
2. Choose the newest driver (by date).

Part 2: Installing the Digitilt DataMate Virtual Comm Port

1. Part 2 begins immediately. A wizard appears.
2. If no wizard appears, see instructions at the bottom of this page.

Tell DMM which Comm Port to use.

1. Turn on your computer.
2. Connect the DataMate to your computer.
3. Switch the DataMate on.
4. Start DMM
5. Choose DataMate - Options

1. Choose a Comm Port from the list. Try the highest number first. DMM will remember this port.
2. Click OK.
3. Now your PC and DMM are ready to communicate with the DataMate.

If the Wizard does not appear....

You must start the wizard manually.

1. Connect the DataMate to the PC. Switch it on.
2. Click Start.
3. Click Run.
4. Enter devmgmt.msc and click OK. This opens the device manager.
5. One driver should be listed in "Ports." The other driver should be listed in "Universal Serial Bus controllers". You might see a yellow warning icon.
6. Right-click on the driver.